# Scan settings for accurate text reading

Set your scanner to black and white at 300 dpi, saving as PDF, so Content Central gets the clearest pages to read and searches find the printed text.

Product: content-central · Versions: 7.x · Audience: user · Time: 10 minutes · Last verified: 2026-11-04

Canonical: https://help.ademero.com/content-central/capture/scan-settings-for-accurate-text-reading

**When you're done, your scanner is set up to give Content Central the clearest possible pages, so searches find the printed text.**

Content Central reads the printed text on every scanned page (this is called OCR). How well it reads depends mostly on the scan. A few settings on your scanner, or in its scanning app, make the biggest difference.

## Set your scanner

1. **Color mode: black and white.** Your scanner may call it *Black & White*, *Bitonal*, *Line art*, or *1-bit*. Content Central keeps black-and-white pages at 300 dpi, but stores color pages at a lower 200 dpi.

2. **Resolution: 300 dpi** (dots per inch, often shown as *DPI* or just *Resolution*). Lower settings blur small print and turn 8s into Bs. Higher settings make bigger files with no real gain.

3. **File type: PDF.** TIFF works just as well if that's what your scanner offers. If there's a quality or compression slider, set it to the highest quality.

4. **Straighten and clean up.** If your scanner offers automatic straightening (sometimes called *deskew*) and blank-page removal, turn them on.

**What you should see:** scan one page the way you normally send scans to Content Central, wait about 10 seconds, then type a distinctive word or number printed on it into the search box at the top of Content Central. That page appears in the results.

## Get the paper right

- **Scan originals.** Faxes and copies of copies lose detail that can't be recovered.
- **Keep pages flat and straight.** Remove staples and sticky notes, and unfold creases.
- **Colored paper:** still scan in black and white. If the background comes out gray or speckled, try your scanner's brightness or contrast setting. If it still reads badly, ask your administrator about the **Use advanced image preparation** setting.

## Things to know

| Situation | What to do |
| --- | --- |
| Handwriting isn't found by search | Content Central reads printed text, not handwriting |
| Searches miss text on pages scanned before you changed settings | New settings don't improve old scans. Rescan the ones you need |

## Still stuck?

Contact support with a sample scan that reads badly and your scanner's make and model.

## What's next

- [Find any invoice by a number printed on it](https://help.ademero.com/content-central/search-and-find/find-invoices-by-a-number-printed-on-them)
- [Control OCR and image preparation](https://help.ademero.com/content-central/capture/control-ocr-and-image-preparation)
